Cable Testers

Cable testers

Cable testers for everyone is CableJoG Ltd's motto. We design, manufacture and distribute a range of cable testers from 12 test points in the case of the AudioJoG Pro and AudioJoG Rack through to 1024 in the CableJoG 512 with the extra 512 adaptor.

All CableJoG's cable testers have at least one memory option enabling rapid testing of similar cables.

All CableJoG's cable testers, except the RibbonJoG model, test every pin against every other pin regardless which 'side' of the cable tester the cables are plugged into. This means that shorts across unconnected pins are automatically identified.

All CableJoG's testers check for continuity. The minimum resistance detected varies from model to model but, is always sufficient for a whole roll or reel of cable to be tested.

The RibbonJoG cable tester is the only end to end cable tester in our range as it is intended for testing only ribbon cables.

The AudioJoG cable testers are designed for the Audio Professional who needs to check a variety of audio leads. Using two AudioJoG cable testers it is possible to test the cable in situ without bringing the cable ends together into one cable tester. Testing is carried out from the local end, however the results can be seen at both ends.

AudioJoG Pro is a small hand held battery power unit whereas, the AudioJoG Rack is a mains powered 1u 19 inch rack mounted.

CableJoG's 64,128,256 and 512 are universal cable testers and in conjunction with cable adaptors can be used to test virtually any cable or cable harness.

Audio cable testers are specially adapted cable testers for the professional audio user. The AudioJoG range of cable testers are designed to check a variety of audio leads whether it’s at the factory being made or in a field in Wiltshire before a famous concert starts. Audio cable testers have the mating connectors suitable for testing the most common types of leads, XLR’s for microphones, ¼ inch jacks for guitar leads, Speakon’s for speaker or lighting and phono’s DIN’s BNC’s for ancillary equipment. AudioJoG Pro is a small hand held battery power unit whereas, the AudioJoG Rack is a mains powered 1u 19 inch rack mounted. Having the 19 inch rack mount version in the amplifier rack means it’s always there for that unexpected cable failure. It’s non-metal construction won’t interfere with the other equipment and enables faults to screen or ground to be easily identified.

Using two AudioJoG cable testers it is possible to test the cable in situ without bringing the cable ends together into one cable tester. Testing is carried out from the local end, however the results can be seen at both ends. The AudioJoG units use the screen or ground as a common reference connection and then the actual signal lead under test to send or receive data from the other unit. Audio cable testers can be bought very cheaply but, when it comes to doing the job time and time again it’s AudioJoG cable testers that win through.




Home - Cable tester Products - Cable Testers - Cable Testing Equipment - Technical tester data


Cablejog Logo
CableJoG Ltd   Registration No.: 4695640   VAT No.: 468 0289 22
Registered Office: 18 Browmere Drive, Croft, Warrington, Cheshire, WA3 7HT, England
Telephone: +44 (0)1925 764471   Fax: +44 (0)1925 764903
CALL US NOW!
01925 764471
  Or we'll pay for the call!
Please fill in the form below for a rapid response during normal office hours.
Name:
Tel. No.:
Email: