Cable Testers

CableJoG 256 Cable Testers

The CableJoG 256 cable testers can test up to 256 individual connections of all manufacturers of connectors. This simple cable tester stores up to 12 separate connection configurations. Each cable that is tested is compared with the configuration stored in its memory to produce a pass/fail indication of each pin connection.

Operations Manual (256) PDF


(click pic to enlarge)

Each test result can be transferred to a PC or printer via a comms link to store, tabulate and print test information from CableJoG software that is provided.

Each test unit can be configured to the customers requirements by producing a loom of connectors that the customer readily uses, therefore forming a versatile test instrument.

CableJog 256 cable testers technical information:

CONNECTOR PINS: 4 x 64way via a standard IDC header (2 x 34 each way)
KEYBOARD: 4 x 4 Keyboard; 0 to 9, 4 cursor keys, Clear & Enter
DISPLAY: 2 Line 16 Character Alphanumeric LCD Backlit Display
PROCESSOR Z80 CMOS: Real Time Clock and Serial I/O
MEMORY 32K EPROM, 32K RAM, 12 cable memory store
     - External 'Plug Top' Power Supply
     - 5 year Lithium [Memory Backup]
     - Width: 470mm Length: 180mm Depth: 60mm
RS232 - Printer / PC Link

Plug in your cable and learn the connections. The connections and any default settings are held in compare memory.

Using a wire connected to one of the CableJaoG's pins it is possible to 'probe' or 'bell out' the a cable or partial cable where only one end is a connector available for connection to the unit.

Plug in another cable and run a comparison between it and the details held in compare memory. The test can be run once, looped till fail or continuously allowing several cables to be tested without further keystrokes or staged, where a cable can be tested to a given stage and, once passed the next stage is automatically loaded and testing continues until completed. Results can be displayed on the unit, printed out or saved and later transferred to a 'PC'.

Call up one of twelve previously stored cable connection details.

Change or modify any of the cable details in compare memory; Connector pin numbers and locations, serial number, date and time stamp, type of test run, and cable connections.

Transfer details in compare memory to one of twelve locations in the database memory.

Either ON-LINE for continuous result logging and label printing. Or OFF-LINE (batch mode) for when the unit is not connected to a printer.

Get cable details from the 'PC', which can hold an unlimited number.

Send cable dtabase to the 'PC' for achiving or transferring to another unit. Send cable test results to the 'PC' for further analysis.

Configure the unit to work the way you want.

Home - Cable tester Products - Cable Testers - Cable Testing Equipment - Technical tester data

Cablejog Logo
CableJoG Ltd   Registration No.: 4695640   VAT No.: 468 0289 22
Registered Office: 18 Browmere Drive, Croft, Warrington, Cheshire, WA3 7HT, England
Telephone: +44 (0)1925 764471   Fax: +44 (0)1925 764903
01925 764471
  Or we'll pay for the call!
Please fill in the form below for a rapid response during normal office hours.
Tel. No.: